(1) VDF Wholenberg Engine Lathe
- 50″ Swing x 23′ Centers
- 38″ Swing over Cross Slide
- 47 1/2″ 4- Jaw Chuck
- 3- Steady Rest to 41 1/2″
- 6 ft. Taper ATT
- 2 Axis Newall DRO Full Length
- 4- Way Rapid Traverse
- 4.5 315 rpm
- Inch Threading 2-28 TPI
- Metric 1-15 mm
(1) Leblond Lathe s/n NK885
- 32″/40″ Swing with 276″ Centers
- Two Carriages
- Steady Rest
- Boring Bar Post
(1) HEYLIGENSTAEDT Engine Lathe
- 36″ Swing with 120″ Centers
- 21.375″ Swing over Cross Slide
- 32″ 4-Jaw Chuck
- 24″ 3-Jaw Chuck
- 12″ -30″ Steady Rest
- Precision ROHM Centers 1 1/2″ to 20 1/2″ Diameter
- 2-Axis Newall DRO
- Aloris Tool Holders
- 4″ Multi-Angle Boring Bar Block Tapers
- 18-1900 RPM
- 2-28 TPI English 1.125-14.0 Metric Threading
- Coolant
(1) LODGE and SHIPLEY Engine Lathe
- 40″ with 144″ Centers
- 26″ Swing over Cross Slide
- 1′ -31″ Steady Rest
- Full Length Tracer
- Aloris Tool Holders
- 4- Jaw Chucks
- 2- Axis Newall DRO
- Live Centers, Bell Centers to 36″
- 9-507 RPM
- Inch Threading 1-64 TPI
(1) AXELSON Engine Lathe
- 20″ Swing with 144″ Centers
- 14″ Swing over Cross Slide
- 18″ 4-Jaw Cushman Chuck
- 16″ 3-Jaw SCA Chuck
- 12″ Steady Rest
- 6″ Steady Rest
- 16″ Steady Rest
- 4″ Multi-Angle
- Bull Nose Centers to 14″ Diameter
- Aloris Tool Holder
- Tapers, Coolant
- Travel-A-Dial
- Inch Threading 1.5 – 92 TPI
- RPM 8.5-961 Max
(1) AXELSON Engine Lathe
- 20″ Swing with 120″ Centers
- 14″ Swing over Cross Slide
- 18″ 4-Jaw Cushman Chuck
- 16″ 3-Jaw SCA Chuck
- 12″ Steady Rest
- 6″ Steady Rest
- 16″ Steady Rest
- 4″ Multi-Angle
- Bull Nose Centers to 14″ Diameter
- Aloris Tool Holder
- Tapers, Coolant
- Travel-A-Dial
- Inch Threading 1.5 – 92 TPI
- RPM 8.5-961 Max
(1) AXELSON Engine Lathe
- 20″ Swing with 96″ Centers
- 14″ Swing over Cross Slide
- 18″ 4-Jaw Cushman Chuck
- 16″ 3-Jaw SCA Chuck
- 12″ Steady Rest
- 6″ Steady Rest
- 16″ Steady Rest
- 4″ Multi-Angle
- Bull Nose Centers to 14″ Diameter
- Aloris Tool Holder
- Tapers, Coolant
- Travel-A-Dial
- Inch Threading 1.5 – 92 TPI
- RPM 8.5-961 Max
(1) AXELSON Engine Lathe
- 25″ Swing with 72″ Centers (28.750 actual swing)
- 19″ Swing over Cross Slide
- 24″ 4-Jaw Cushman Chuck
- 20″ 3-Jaw SCA Chuck
- (1) 3″ -14″ Steady Rest
- (1) 14″ -25″ Steady Rest
- Aloris Tool Holders
- RHOM Centers from 0-18″
- 4″ Multi-Angle Boring Bar Block
- Tapers, Coolant
- Inch Threading 1-30 TPI
- RPM 6-555 Max
- Coolant
(1) MONARCH Tracer Lathe
- 16″ Swing with 72″ Centers
- (24.5″ Actual Swing)
- Full Length Factory Tracer
- 16″ 3-Jaw Cushman Chuck
- 16″ 4-Jaw Cushman Chuck
- Aloris Tool Holders
- Precision Centers
- 2″ x 36″ Carbide Contouring Bar
- Travel-A-Dial
- Coolant
- Inch Threading 2-120 TPI
- RPM 24-1000
(1) CINCINNATI Engine Lathe
- 12″ Swing with 36″ Centers
- 8.25″ Swing over Cross Slide
- 8″ -6 Jaw Cushman Chuck
- Aloris Tool Holders
- Complete 5C Quick Release Collet System
- Super Precision Live Centers
- Tapers, Coolant
- Inch Threading 3-1200
- Travel-A-Dial
(1) STANDARD Modern Lathe
- 16″ Swing with 60″ Centers
- 12″ 3-Jaw Cushman Chuck
- Steady Rest